⚡ Hot Tub Emergency? We Answer 24/7 — Call (833) 435-3362 for Same-Day Service
Back to All Articles

How to Fix a Crack in a Hot Tub

Published: 2026-11-17 HotTubRepair.us Team
How to Fix a Crack in a Hot Tub
Diagnostic technical guide: How to Fix a Crack in a Hot Tub

You step out to the tub and there it is: a thin dark line across the acrylic, or a small star-shaped crack near a jet. A crack in a hot tub shell looks worse than it usually is, but it is not something to ignore. Water gets behind the acrylic through even a hairline crack, and once it reaches the foam and the wooden frame, the damage spreads out of sight.

This guide shows you how to fix a crack in a hot tub with two-part epoxy, step by step. It covers how to tell a surface crack from a structural one, which epoxy to use for each type, and the point where a DIY patch stops being the right call and a professional bond takes over.

Can You Fix a Crack in a Hot Tub Yourself?

Yes, a surface crack in a hot tub can be fixed with two-part epoxy, as long as the shell is sound underneath. Drain below the crack, clean and dry the area, apply the epoxy, and let it cure for 24 to 48 hours. Call a professional when the crack leaks or keeps spreading, because those signs point to structural damage.

What Kind of Crack Is It?

Not every crack is the same job. The first step is always to work out which kind you are looking at, because the type decides whether epoxy will hold or the crack needs a professional bond.

A hairline surface crack is a thin line in the top acrylic layer only. It does not leak, and the shell feels solid underneath. These are the cracks a DIY epoxy repair handles well.

A structural crack runs deeper, through the acrylic and into the fiberglass backing. It usually leaks, it often sits near a seat or a jet where the shell takes the most weight, and it may keep spreading a little further every week. A crack like that needs a professional repair, because the shell itself has lost strength.

A third type is the blister, where the acrylic lifts away from the fiberglass in a bubble. Blisters come from chemical damage or from water that has already got behind the shell. A blister is not a crack you can fill from the top. It needs the lifted acrylic cut back and re-bonded, which is a professional job.

Look at the crack in good light before you decide anything. A hairline crack is a thin line you can barely feel with a fingernail. Anything you can fit a fingernail into, or any crack that branches into a star shape, deserves a closer look, and a photo sent to a technician will usually settle whether it is a DIY patch or a professional bond.

Check your warranty first, before you touch any crack. Some spa warranties cover shell defects, and the terms decide whether a DIY repair is the right first move. Keep the warranty document beside you while you read the rest of this guide.

Can You DIY This? The Honest Rule

The honest rule is simple: patch it yourself when the crack is small, dry and stable, and call a professional when it is not.

A DIY epoxy repair makes sense when the crack is a hairline surface crack, the tub holds water, the shell feels solid, and you can drain the tub below the crack and keep the area dry while the epoxy cures. If all four of those are true, the repair in this guide will hold.

Call a professional when the crack leaks steadily, when it sits near a seat or a jet, when it keeps spreading, or when the shell feels soft or hollow underneath. Those are the signs of structural damage, and a surface patch over structural damage only hides the leak while water keeps working into the foam.

Two more things before you start. First, check your warranty, as above: a shell defect may be covered, and a warranty repair costs you nothing but a phone call. Second, be honest about your tools. This repair needs a rotary tool or a steady hand with sandpaper, a dry work area, and a full day for the epoxy to cure. If you cannot keep the tub drained and dry for that long, book a professional instead.

Cost is not the reason to DIY a crack. A tube of two-part epoxy is cheap, but a failed patch costs more than the epoxy saved, because the water it let through has been soaking the foam while you waited. DIY when the crack qualifies above. Book a professional when it does not, and treat the call as the cheaper repair, not the expensive one.

Need Professional Hot Tub Repair?

We have local technicians available nationwide.

How to Fix a Hot Tub Crack With Epoxy, Step by Step

This is the 7-step epoxy repair for a hairline surface crack. Read the whole list before you start, because steps 1 and 2 decide whether the epoxy bonds at all.

Match the epoxy to the crack. Repair guides such as EngineerFix recommend a rigid two-part epoxy for a structural crack, and a flexible sealant where the shell moves and flexes. For the hairline surface cracks in this guide, a two-part acrylic or marine-grade epoxy is the right choice. Do not use household silicone or a general-purpose glue: neither can stand the heat, the water pressure and the constant expansion of a spa shell.

  1. Drain below the crack and cut the power. Drain the tub until the water sits below the crack, then cut the power at the breaker. Working on a live tub with the water low is not safe, and the repair area must stay dry.
  2. Clean and dry the area. Scrub the crack and the acrylic around it with a non-abrasive cleaner, rinse it, and let it dry completely. The surface must be absolutely dry before any epoxy goes on, because epoxy will not bond to damp acrylic.
  3. Sand lightly. Sand the crack and a small margin around it with 120-grit sandpaper until the surface is dull. Sanding gives the epoxy something to grip. Wipe the dust away with a dry cloth.
  4. Cut a shallow V groove for anything bigger than a hairline. For a crack wider than a hairline, cut a shallow V-shaped groove along the crack with a rotary tool. The groove gives the epoxy more surface to bond to, which is what makes the repair hold under pressure.
  5. Apply the epoxy. Mix the two-part epoxy exactly as the label says, and press it into the crack and the groove with a putty knife. For a structural crack, press a strip of fiberglass cloth into the wet epoxy for extra strength. Work the epoxy in until no air is trapped underneath.
  6. Let it cure fully. Leave the repair alone for 24 to 48 hours. Do not refill the tub early: epoxy that looks dry on top can still be soft underneath, and water will lift it straight off the shell.
  7. Sand smooth and leak-test. Sand the cured repair smooth with fine sandpaper, then refill the tub and watch the repair for a full day. If the water level holds and no damp patch appears, the repair is done.

When to Call a Professional

Some cracks are not DIY jobs, and knowing which ones saves you a second repair. Call a professional when the crack leaks steadily, when it sits near a seat or a jet, when it keeps spreading after a repair, or when the shell feels soft or hollow under your hand. Our advice: if the crack flexes or keeps spreading, call a professional rather than patching it again.

A professional shell repair follows the same epoxy method, with two differences that matter. The technician routes the crack properly and bonds it with a methacrylate adhesive or fiberglass-reinforced putty, then sands and polishes the repair back to the factory contour. The result is a watertight shell with its strength restored, not a patch sitting on top of a crack.

If the crack is in the shell and you want it fixed properly, our cracked hot tub shell repair service covers acrylic and fiberglass shells nationwide.

A hairline crack is a weekend repair when you catch it early and let the epoxy cure properly. A crack that leaks, spreads or sits where the shell carries weight is a professional job. Either way, do not leave it: water behind the shell only ever makes the next repair bigger.

Hot Tub Broken? We're One Call Away.

Same-day hot tub repair nationwide. Connect with local experts, ready to fix your tub today.

Call (833) 435-3362Request Pricing →
Tap to Call — We Answer 24/7